3 Serials Redundant Controller MPIO Driver
Installation Guide (Windows Server 2003 x86 / x64)

Preparation:

1. Created Volume to initialize.

2. If Use SAS Model with LSI SAS HBA, Please Change LSI SAS HBA Bios Setting :
   Direct Attached Spinup Delay : 2
   Direct Attached Max to Spinup : 8
   Expander Spinup Delay : 2
   Expander Max to Spinup : 8
   Report Device Missing Delay : 2
   IO Device Missing Delay : 2

3. Connection Host Cable to Dual Controller Host Channels.
   Ex. If Volume Mapping to Ch 0, Dual Controller Host Ch 0 Need to Connection Cable.

4. Installation Host HBA to Server then Boot up to Microsoft Windows Server 2003 and Installed Host HBA Driver.

5. Verify "Disk Drives" has Detect Same 2 Controller Volume at Windows "Device Manager",
   If not, Please check Setting & HBA Connection is Correct.
 

Installation MPIO Driver:

1. Uncompress MPIO Driver to Windows Server 2003.

2. Into MPIO Driver Store Folder.

3. Initiation Vender Name {8 Words} & Product (Volume) Name {16 Words} into Configuration File : "Device.txt",
   Every One Redundant Volume Name Need Add-in to Configuration File at Each Row (doesn't use space between
   Vender Name & Product {Volume} Name), Every Row Included quotation marks (") at Row Begin & Last Character. 
   Format.    "Vender 8Product       16"
   Note.      If Vender Name Length not enough 8 words or Product {Volume} Name not enough 16 words, Must be use
              Space words to Satisfy Demand. 
   Ex.        Vender Name is "2123D" and Product (Volume) Name is "Volume000", Will be Input 
              "2123D   Volume000       "
   Important. When Device List File is Finished to Edit, Must to add One Empty Space Row of Last.

4. Execute Batch File Config32.bat to Produce MPIO Configuration File "AMDSM.INF" (x64 is AMDSM64.INF).
   Important. When Finished, Please Check Configuration File has Parameter, if the Configuration File is 0 Byte
              or Not Included any Property, Please Make Sure Device List File again, to Verify the Format is 
              Correct Then to Execute Batch File Again.

5. Click amin32.exe (x64 Version is amin64.exe) to Starting Install MPIO Driver.

6. Will be Displayed Dialogue Box on the Screen, Please Follower the Step to Install :
   "OK" ->  "OK" ->  "Yes" ->  "OK" ->  "OK" -> Waiting for Few Minutes will be Finished Install.

7. Double Click to Execute "Win2k3MDiskConf.reg" to Add / Change Time Out Value.
   It Will to Pop-up Dialogue Box, Please Click "Yes".
 
8. Manually Restart Server to Finished Install of MPIO Driver.

9. It in the "Device Manager" will be add 1 New Device of Volume to Group.


Un-installation MPIO Driver: 

If Want Un-Installed MPIO Driver, Please Execute "amui32.exe" (x64 is amui64.exe), When Finished need Manually Reboot Server.
